PFSS 10
10 inch cartridges; seven-cartridge stainless steel housing; 2 inch BSP female
Filter housings
NICE stainless steel PFSS housings, clear water filter housings and polypropylene Big Blue BB10 and BB20 housings. Compare model specifications below.
Tell us the rating, size, material and connection you need. Product suitability and available variants are confirmed during quotation.
Choose a catalogue reference
These are named catalogue models and ordering examples. Confirm availability and the exact configuration with your quotation. For another size or end connection, describe your requirement.
Show 11 catalogue references
PFSS 20
20 inch cartridges; seven-cartridge stainless steel housing; 2 inch BSP female
PFSS 30
30 inch cartridges; seven-cartridge stainless steel housing; 2 inch BSP female
PFSS 40
40 inch cartridges; seven-cartridge stainless steel housing; 2 inch BSP female
PFSS 10BB
10 inch cartridge; single-cartridge stainless steel Big Blue housing; 2 inch BSP female
PFSS 20BB
20 inch cartridge; single-cartridge stainless steel Big Blue housing; 2 inch BSP female
PFSS 30BB
30 inch cartridge; single-cartridge stainless steel Big Blue housing; 2 inch BSP female
PFSS 40BB
40 inch cartridge; single-cartridge stainless steel Big Blue housing; 2 inch BSP female
BB10
10 inch × 4.5 inch cartridge; polypropylene housing; 1½ inch BSP
BB20
20 inch × 4.5 inch cartridge; polypropylene housing; 1½ inch BSP
DOE/PC/10
10 inch; clear polycarbonate bowl; double open end; operating limits to confirm
Review selected products · Printable product sheet (opens in a new tab)
Housing specifications
Catalogue specifications for shortlisting. Confirm the exact configuration, current availability and operating limits with your quotation.
NICE pressurized stainless steel housings
304 stainless steel construction, 1.5 mm thickness. Maximum operating pressure: 8 bar. Maximum temperature: 149°C (300°F). These are housing-only ratings; the installed cartridge and seals can impose lower process limits.
On a small screen, swipe the table sideways to compare columns.
| Model | Cartridge length | Cartridge count | Inlet/outlet | Drain |
|---|---|---|---|---|
| PFSS 10 | 10 inch | 7 | 2 inch BSP female | ¾ inch NPT male |
| PFSS 20 | 20 inch | 7 | 2 inch BSP female | ¾ inch NPT male |
| PFSS 30 | 30 inch | 7 | 2 inch BSP female | ¾ inch NPT male |
| PFSS 40 | 40 inch | 7 | 2 inch BSP female | ¾ inch NPT male |
On a small screen, swipe the table sideways to compare columns.
| Model | Cartridge length | Cartridge count | Inlet/outlet |
|---|---|---|---|
| PFSS 10BB | 10 inch | 1 | 2 inch BSP female |
| PFSS 20BB | 20 inch | 1 | 2 inch BSP female |
| PFSS 30BB | 30 inch | 1 | 2 inch BSP female |
| PFSS 40BB | 40 inch | 1 | 2 inch BSP female |
On a small screen, swipe the table sideways to compare columns.
| Model | Diameter × height (unit not stated) | Rated capacity (GPM; gallon basis not stated) | Approximate weight |
|---|---|---|---|
| PFSS 10 | 230 × 620 | 35 GPM | 19 kg |
| PFSS 20 | 230 × 920 | 70 GPM | 22 kg |
| PFSS 30 | 230 × 1120 | 90 GPM | 25 kg |
| PFSS 40 | 230 × 1380 | 120 GPM | 28 kg |
| PFSS 10BB | 170 × 525 | 15 GPM | 19 kg |
| PFSS 20BB | 170 × 750 | 25 GPM | 21 kg |
| PFSS 30BB | 170 × 1000 | 35 GPM | 23 kg |
| PFSS 40BB | 170 × 1250 | 45 GPM | 25 kg |
These installation figures are transcribed from catalogue page 22. The source does not state the dimension unit or whether GPM means US or Imperial gallons per minute. Do not size an installation from these figures until the technical team confirms units, the drawing and cartridge pressure drop.
PFSS housings use double open end (DOE) cartridges and spring seal assemblies. Request a dimensional drawing and flow sizing for the proposed installation.
Big Blue polypropylene housings
On a small screen, swipe the table sideways to compare columns.
| Specification | BB10 | BB20 |
|---|---|---|
| Cartridge length / outer diameter | 10 inch / 4.5 inch | 20 inch / 4.5 inch |
| Head and bowl | Polypropylene | Polypropylene |
| O-ring | PVC | PVC |
| Inlet/outlet | 1½ inch BSP | 1½ inch BSP |
| Maximum pressure | 100 psi / 7 kg/cm² | 90 psi / 6.3 kg/cm² |
| Weight | 2.3 kg | 3.2 kg |
Black cap with air-pressure relief. Set includes a PP 5 micron cartridge, O-ring, L bracket, spanner and screws. Maximum temperature is not stated in this catalogue; confirm for your duty.
NICE clear water filter housings
10 and 20 inch options for 2.5 inch outer-diameter cartridges, in double open end (DOE) or single open end (SOE) types. Bowl materials: polycarbonate (PC) or styrene acrylonitrile (SAN); PVC O-ring. Catalogue ordering example: DOE/PC/10.
The catalogue contains conflicting pressure statements for the clear housing. Request a confirmed model-specific pressure and temperature limit before selection.
Source: Pureflo customer catalogue, printed pages 21–24. Maximum temperature and pressure are separate catalogue ratings; confirm combined operating conditions and liquid compatibility before selection.
Product views
Pureflo product photographs show the available constructions. Match the required code, dimensions and end connection with the specification above; photographs do not establish an exact size.
Give the technical team
a useful starting point.
An existing product reference is helpful. If you don’t have one, describe the application and what you want to achieve.
Useful information to include
- Cartridge type and dimensions
- Connection size and installation arrangement
- Liquid and material compatibility requirements
- Operating pressure, temperature and flow
- Quantity, delivery location and required date